Panneaux cannelés WPC

A compatible construction adhesive can work on a clean, flat and stable interior wall. Mechanical fasteners or a combined method may be better on uneven surfaces, high-traffic walls or where the substrate needs extra holding power.

Use a fine-tooth saw blade suitable for composite material. Support the panel fully, mark the finished face carefully and test the cut on an offcut before cutting visible pieces.

Yes. Correct loose material and major high or low spots first. A flat surface keeps the flutes straight, improves adhesive contact and prevents visible gaps between panels.

Turn off and verify the circuit before working. Measure from fixed reference lines, cut the opening carefully and keep the required clearance for the electrical box and cover plate. Electrical changes should be completed by a qualified electrician.

Plan trims before the first panel is fixed. Depending on the trim profile, it may need to be installed first or fitted as the panels progress. Dry-fit every corner and end detail before applying adhesive.

They may be suitable for selected dry or splash-prone locations when the product, adhesive, sealing and ventilation are appropriate. Decorative panels do not replace an approved waterproof wall system in a shower or other continuously wet area.

Store the panels flat, dry and in normal indoor conditions before installation. Avoid fitting material immediately after exposure to extreme cold, heat or moisture, and follow the product-specific instructions.

Use a professional for complex corners, tall walls, difficult substrates, wet areas, extensive electrical cut-outs or projects where local requirements or site conditions are uncertain.