Swan Canada installation guide
Water Vapor Fireplaces
Install the fireplace only in accordance with its current manufacturer manual. Electrical, plumbing, framing, ventilation and finishing requirements vary by model and site.
Tools & materials
Current manufacturer installation manual
Measuring and levelling tools
Framing and finishing materials specified for the model
Dedicated electrical provisions where required
Water supply or reservoir access as applicable
Qualified electrical and plumbing trades
Before you begin
Do not improvise clearances, wiring, water connections or ventilation. Confirm service access and use licensed professionals for regulated work. Keep the appliance disconnected until the installation is ready for commissioning.
Follow these installation steps
Common questions about Water Vapor Fireplaces
Does a water vapor fireplace require professional installation?
Professional installation is strongly recommended. Electrical supply, water connections, enclosure details, clearances and local requirements must match the appliance manual and may require licensed trades.
What electrical connection is required?
Use only the voltage, circuit protection and connection method specified for the exact model. A qualified electrician should complete new circuits, concealed wiring or any connection required by local rules.
How is water supplied to the fireplace?
Some models use a refillable reservoir and others may allow a direct water connection. Follow the model manual, use the specified water quality and have permanent plumbing completed by a qualified plumber.
Does the enclosure need ventilation or access panels?
Provide every air opening, service clearance and access point required by the manufacturer. Do not seal the unit into a wall in a way that blocks airflow, drainage or maintenance access.
What clearances are needed around the unit?
Clearances vary by model and enclosure material. Use the appliance manual as the controlling source and keep vents, sensors and service areas unobstructed.
Can wall panels be installed around the fireplace?
Only use finishes that are suitable for the temperatures, moisture and clearances stated in the fireplace and finish-material instructions. Keep joints and trims away from required vents and service openings.
What should be tested before closing the wall?
Test power, water, drainage if applicable, flame effect, controls, leak protection and service access. Correct all issues before permanent panels or millwork make the unit difficult to reach.
Is the vapor flame safe to touch?
The visual flame is created with illuminated water vapor and is generally cool, but the appliance still contains electrical components and operating equipment. Follow all supervision, access and maintenance instructions in the model manual.
